The latest in thermal imaging technology packaged in an OEM configuration for rapid development into your designs. Infrared camera modules are available in a wide range of configurations from simple volts in video out modules to custom fully integrated digital interface. Most of the modules are based on latest generation uncooled Focal Plane Array detector cores. This proven technology provides for crisp imaging capabilities and robust reliable operation. With an NETD of .08C (Typical) the New Digital Detector cores are ready for the most discriminating of applications. The New Bolometer is ready to go and this little guy packs some serious performance to cost ratio's. The new bolometer core is very small, lightweight, and lean on the power consumption. This innovative system core is poised to revolutionize the thermal imaging market. Specifications Detector 320 x 240 uncooled Focal Plane Array Spectral Response 7-14 micron Start Up Time 30 seconds Contrast / Brightness Automatic / manual gain / level / polarity or RS232 controlled Optics 18mm 25mm 50mm 75mm 100mm 150mm Germanium Ouptut Format NTSC / PAL compatible and Digital out Digital Zoom 2x RS232 controlled Size (18mm Lens) 3.7"L x 4"W x 4.9"H (94 x 102 x 125mm) Weight (18mm Lens) 1.6lbs. (.73kg) Operating Temperature -30C to 66C Storage Temperature -40C to 80C Author- 7bInfrared Products The company is into thermal Infrared products and night vision equipment like night vision goggle, night vision binocular.infrared camera.
Please Rate this Article 5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
