Storm Water Management is a management practice which involves using techniques to control storm water runoff, sediment control and soil stabilization. Storm water best management practices not only control run off but are also very helpful in reducing the nonpoint source pollution caused by storm water runoff. A storm water management system would basically involve controlling the storm water run off in ways of quantity, quality and improving the quality of storm water in the most cost effective manner so that it is ecologically friendly and can be reused and recycled. Stormwater best management practices cannot be implemented on an individual practice basis. Since there are many approaches and systems involved in storm water management it is ideal that a holistic approach be made to control the storm water runoff and managing them better. The main function of a Storm water best management practices is to control a storm water discharge and channel it. Storm water management is used whenever storm water runoff occurs. To harness this run off, which is caused by the precipitation from the rain and the snow melt, storm water management is the best solution that is there. A Storm water overflow occurs due to the precipitation of rain water and snowmelt that flows over impermeable surfaces and does not percolate into the ground. The runoff accumulates debris, chemicals, sediment or other pollutants that could adversely affect water quality if the runoff is discharged untreated. It is important to know that once pollutants are present in a water body, or after a receiving water body physical structure and habitat have been altered, it is much more difficult and expensive to restore its original condition. Therefore, it is recommended to utilize a stormwater management system that focuses on preventing degradation of receiving waters. Storm water BMPs under each of the minimum measures(particularly the category of pollution prevention, as well as outreach, education, and erosion and sediment control)focus on the prevention of pollutants from ever getting into storm water. Therefore, it is very important to use Stormwater BMPs. The best method to control this discharge is by using the storm water BMPs. In addition to this, an NPDES permit is also required for storm water BMPs to control these discharges. Please seek help of professionals now to resolve the problems of Stormwater runoff.
Please Rate this Article 5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
